Cummins 2007.5–2018 Ram 6.7L Cummins VGT Turbo & EGR Cooler Mounting Stud (4931642)
Description
Servicing or replacing the VGT turbocharger or EGR cooler on your 2007.5–2018 Ram 6.7L Cummins? Make sure damaged, corroded, or missing mounting hardware is replaced with the correct factory component.
The Cummins 4931642 VGT Turbo / EGR Cooler Mounting Stud is a genuine factory Cummins replacement stud designed for use when mounting the VGT turbocharger or EGR cooler.
Years of extreme exhaust heat, corrosion, and repeated heat cycles can make the original hardware difficult to remove or unsuitable for reuse. If you're already servicing the turbocharger or EGR system, replacing questionable mounting hardware now can save you from dealing with it again later.
Features
- Genuine Cummins replacement component
- Cummins Part Number: 4931642
- Fits 2007.5–2018 Ram 6.7L Cummins applications
- Used for VGT turbocharger mounting
- Used for EGR cooler mounting
- Direct replacement for factory mounting hardware
- Ideal for replacing damaged, corroded, or missing studs
- Factory fit and application
Why Replace the Mounting Stud?
The VGT turbocharger and EGR system operate in one of the hottest areas of the engine.
Over time, repeated heat cycles and corrosion can take their toll on the original mounting hardware. Studs may become heavily corroded, damaged during removal, or have compromised threads that make proper reassembly difficult.
If the original stud is questionable, replacing it with the correct Cummins 4931642 mounting stud is inexpensive insurance while everything is already apart.
Applications
Designed for:
- 2007.5–2009 Dodge Ram 2500 & 3500 6.7L Cummins
- 2010–2012 Ram 2500 & 3500 6.7L Cummins
- 2013–2018 Ram 2500 & 3500 6.7L Cummins
Important Notes
- Cummins Part Number: 4931642
- Genuine factory Cummins replacement mounting stud.
- Used for VGT turbocharger or EGR cooler mounting.
- Sold individually.
- Mounting nut is sold separately.
- Inspect existing hardware during turbocharger or EGR cooler service.
- Replace studs with damaged threads, excessive corrosion, or damage from removal.
- Verify required quantity for your specific repair before ordering.
Complete Your Repair
Consider replacing or inspecting:
- Cummins VGT Turbo / EGR Cooler Mounting Nut – 3818824
- Cummins VGT Turbo Coolant Line Sealing Washers
- Cummins VGT Turbo Oil Line Fitting
- VGT turbo mounting gasket
- EGR cooler gaskets and seals
Cummins 2007.5–2018 Ram 6.7L Cummins VGT Turbo & EGR Cooler Mounting Stud (4931642)
Description
Servicing or replacing the VGT turbocharger or EGR cooler on your 2007.5–2018 Ram 6.7L Cummins? Make sure damaged, corroded, or missing mounting hardware is replaced with the correct factory component.
The Cummins 4931642 VGT Turbo / EGR Cooler Mounting Stud is a genuine factory Cummins replacement stud designed for use when mounting the VGT turbocharger or EGR cooler.
Years of extreme exhaust heat, corrosion, and repeated heat cycles can make the original hardware difficult to remove or unsuitable for reuse. If you're already servicing the turbocharger or EGR system, replacing questionable mounting hardware now can save you from dealing with it again later.
Features
- Genuine Cummins replacement component
- Cummins Part Number: 4931642
- Fits 2007.5–2018 Ram 6.7L Cummins applications
- Used for VGT turbocharger mounting
- Used for EGR cooler mounting
- Direct replacement for factory mounting hardware
- Ideal for replacing damaged, corroded, or missing studs
- Factory fit and application
Why Replace the Mounting Stud?
The VGT turbocharger and EGR system operate in one of the hottest areas of the engine.
Over time, repeated heat cycles and corrosion can take their toll on the original mounting hardware. Studs may become heavily corroded, damaged during removal, or have compromised threads that make proper reassembly difficult.
If the original stud is questionable, replacing it with the correct Cummins 4931642 mounting stud is inexpensive insurance while everything is already apart.
Applications
Designed for:
- 2007.5–2009 Dodge Ram 2500 & 3500 6.7L Cummins
- 2010–2012 Ram 2500 & 3500 6.7L Cummins
- 2013–2018 Ram 2500 & 3500 6.7L Cummins
Important Notes
- Cummins Part Number: 4931642
- Genuine factory Cummins replacement mounting stud.
- Used for VGT turbocharger or EGR cooler mounting.
- Sold individually.
- Mounting nut is sold separately.
- Inspect existing hardware during turbocharger or EGR cooler service.
- Replace studs with damaged threads, excessive corrosion, or damage from removal.
- Verify required quantity for your specific repair before ordering.
Complete Your Repair
Consider replacing or inspecting:
- Cummins VGT Turbo / EGR Cooler Mounting Nut – 3818824
- Cummins VGT Turbo Coolant Line Sealing Washers
- Cummins VGT Turbo Oil Line Fitting
- VGT turbo mounting gasket
- EGR cooler gaskets and seals