Glacier Diesel Power 2003–2007 Dodge Ram 5.9L Cummins Air-Boss CR Intake Plenum Stud Kit (8MMx100MM-SK)
Description
Need replacement mounting hardware for your Glacier Diesel Power Air-Boss CR Intake Plenum?
The Glacier Diesel Power Air-Boss CR Intake Plenum Stud Kit is the correct replacement hardware kit for Air-Boss systems installed on 2003–2007 Dodge Ram 5.9L Common Rail Cummins applications.
Manufactured from stainless steel, this kit includes the four extended-length studs required for the Air-Boss CR intake plenum configuration. Each stud measures 8mm x 100mm, providing the correct replacement hardware when the original Air-Boss studs have been lost, damaged, corroded, or are otherwise unsuitable for reuse.
Because the Air-Boss uses an elevated intake plenum design, the correct-length mounting hardware is important for proper installation. Rather than trying to source generic hardware, this kit gives you the correct stud set specifically intended for the Glacier Diesel Power Air-Boss CR.
Features
- Replacement stud kit for the Glacier Diesel Power Air-Boss CR Intake Plenum
- Designed for 2003–2007 Dodge Ram 5.9L Cummins
- Part Number: 8MMx100MM-SK
- Stainless steel construction
- 8mm x 100mm stud dimensions
- Includes four replacement studs
- Correct extended-length hardware for Air-Boss CR applications
- Ideal for replacing missing, damaged, or corroded Air-Boss hardware
- Complete replacement stud set
Designed for the Air-Boss CR
The Glacier Diesel Power Air-Boss CR isn't simply a flat intake plate.
Its elevated plenum design increases the available area inside the intake system, helping improve airflow toward the rear cylinders of the 5.9L Common Rail Cummins.
That increased plenum height requires the correct extended mounting hardware.
The 8MMx100MM-SK provides four 8mm x 100mm stainless-steel studs specifically intended for the Glacier Diesel Power Air-Boss CR Intake Plenum.
Using the proper hardware helps eliminate the guesswork of trying to find generic studs with the correct diameter and length.
When Should You Replace the Studs?
If you're removing, servicing, or reinstalling an Air-Boss CR, inspect the existing mounting hardware before reassembly.
Replacement should be considered if the existing studs have:
- Damaged threads
- Corrosion
- Damage from removal
- Missing hardware
- Previous installation damage
Having the correct replacement studs on hand can save a lot of frustration once the intake system is already apart.
Applications
Designed for:
- 2003 Dodge Ram 2500 & 3500 5.9L Cummins
- 2004 Dodge Ram 2500 & 3500 5.9L Cummins
- 2005 Dodge Ram 2500 & 3500 5.9L Cummins
- 2006 Dodge Ram 2500 & 3500 5.9L Cummins
- 2007 Dodge Ram 2500 & 3500 5.9L Cummins
- Glacier Diesel Power Air-Boss CR Intake Plenum applications
Kit Contents
Includes:
- (4) 8mm x 100mm Stainless Steel Studs
Important Notes
- Part Number: 8MMx100MM-SK
- Designed specifically as a replacement stud kit for the Glacier Diesel Power Air-Boss CR Intake Plenum.
- Fits applicable 2003–2007 Dodge Ram 5.9L Cummins Air-Boss CR installations.
- Includes four total stainless-steel studs.
- All four studs measure 8mm x 100mm.
- This is a replacement hardware kit only.
- Air-Boss Intake Plenum is NOT included.
- Verify your intake configuration before ordering.
Complete Your Intake System
Pair with:
-
- Glacier Diesel Power 2003–2007 5.9L Cummins Air-Boss CR Intake Plenum
- Glacier Diesel Power 2003–2007 Power-Flo Intake Manifold
- Glacier Diesel Power Pro-Flo Grid Heater Delete Block
- Cummins Grid Heater / Intake Manifold Gaskets
- Glacier Diesel Power Boost Bolt
Glacier Diesel Power 2003–2007 Dodge Ram 5.9L Cummins Air-Boss CR Intake Plenum Stud Kit (8MMx100MM-SK)
Description
Need replacement mounting hardware for your Glacier Diesel Power Air-Boss CR Intake Plenum?
The Glacier Diesel Power Air-Boss CR Intake Plenum Stud Kit is the correct replacement hardware kit for Air-Boss systems installed on 2003–2007 Dodge Ram 5.9L Common Rail Cummins applications.
Manufactured from stainless steel, this kit includes the four extended-length studs required for the Air-Boss CR intake plenum configuration. Each stud measures 8mm x 100mm, providing the correct replacement hardware when the original Air-Boss studs have been lost, damaged, corroded, or are otherwise unsuitable for reuse.
Because the Air-Boss uses an elevated intake plenum design, the correct-length mounting hardware is important for proper installation. Rather than trying to source generic hardware, this kit gives you the correct stud set specifically intended for the Glacier Diesel Power Air-Boss CR.
Features
- Replacement stud kit for the Glacier Diesel Power Air-Boss CR Intake Plenum
- Designed for 2003–2007 Dodge Ram 5.9L Cummins
- Part Number: 8MMx100MM-SK
- Stainless steel construction
- 8mm x 100mm stud dimensions
- Includes four replacement studs
- Correct extended-length hardware for Air-Boss CR applications
- Ideal for replacing missing, damaged, or corroded Air-Boss hardware
- Complete replacement stud set
Designed for the Air-Boss CR
The Glacier Diesel Power Air-Boss CR isn't simply a flat intake plate.
Its elevated plenum design increases the available area inside the intake system, helping improve airflow toward the rear cylinders of the 5.9L Common Rail Cummins.
That increased plenum height requires the correct extended mounting hardware.
The 8MMx100MM-SK provides four 8mm x 100mm stainless-steel studs specifically intended for the Glacier Diesel Power Air-Boss CR Intake Plenum.
Using the proper hardware helps eliminate the guesswork of trying to find generic studs with the correct diameter and length.
When Should You Replace the Studs?
If you're removing, servicing, or reinstalling an Air-Boss CR, inspect the existing mounting hardware before reassembly.
Replacement should be considered if the existing studs have:
- Damaged threads
- Corrosion
- Damage from removal
- Missing hardware
- Previous installation damage
Having the correct replacement studs on hand can save a lot of frustration once the intake system is already apart.
Applications
Designed for:
- 2003 Dodge Ram 2500 & 3500 5.9L Cummins
- 2004 Dodge Ram 2500 & 3500 5.9L Cummins
- 2005 Dodge Ram 2500 & 3500 5.9L Cummins
- 2006 Dodge Ram 2500 & 3500 5.9L Cummins
- 2007 Dodge Ram 2500 & 3500 5.9L Cummins
- Glacier Diesel Power Air-Boss CR Intake Plenum applications
Kit Contents
Includes:
- (4) 8mm x 100mm Stainless Steel Studs
Important Notes
- Part Number: 8MMx100MM-SK
- Designed specifically as a replacement stud kit for the Glacier Diesel Power Air-Boss CR Intake Plenum.
- Fits applicable 2003–2007 Dodge Ram 5.9L Cummins Air-Boss CR installations.
- Includes four total stainless-steel studs.
- All four studs measure 8mm x 100mm.
- This is a replacement hardware kit only.
- Air-Boss Intake Plenum is NOT included.
- Verify your intake configuration before ordering.
Complete Your Intake System
Pair with:
-
- Glacier Diesel Power 2003–2007 5.9L Cummins Air-Boss CR Intake Plenum
- Glacier Diesel Power 2003–2007 Power-Flo Intake Manifold
- Glacier Diesel Power Pro-Flo Grid Heater Delete Block
- Cummins Grid Heater / Intake Manifold Gaskets
- Glacier Diesel Power Boost Bolt