Cummins 2007.5–2024 Ram 6.7L Cummins Intake Manifold Gasket (5264566)
Description
A leaking intake manifold gasket can lead to boost leaks, reduced performance, excessive soot around the intake manifold, and inaccurate airflow into the engine.
The Cummins 5264566 Intake Manifold Gasket is a genuine OEM replacement gasket designed to seal the intake manifold to the cylinder head on 2007.5–2024 Ram 6.7L Cummins engines. Manufactured to Cummins' original specifications, this gasket provides a precise fit and reliable seal to help maintain proper boost pressure, engine efficiency, and long-term reliability.
Whether you're replacing the intake manifold, installing an aftermarket intake horn or Glacier Diesel Power Air-Boss Intake Plenum, servicing the EGR system, or performing cylinder head work, installing a new gasket is inexpensive insurance against future boost leaks.
Features
- Genuine Cummins OEM gasket
- Cummins Part Number: 5264566
- Fits 2007.5–2024 Ram 6.7L Cummins
- Direct OEM replacement
- Seals the intake manifold to the cylinder head
- Helps prevent boost leaks
- Maintains proper intake air pressure
- High-quality factory sealing material
- Ideal during intake manifold or cylinder head service
Why Replace the Intake Manifold Gasket?
The intake manifold gasket is compressed between the cylinder head and intake manifold. After years of heat cycles and boost pressure, the gasket can lose its ability to maintain a proper seal.
Replacing the gasket whenever the intake manifold is removed helps:
- Prevent boost leaks
- Restore proper sealing
- Maintain engine performance
- Reduce soot buildup around the intake manifold
- Avoid repeating the repair because of a reused gasket
A new OEM gasket is always recommended anytime the intake manifold has been removed.
Glacier Tech Tip
If you're removing the intake manifold to install a Glacier Diesel Power Air-Boss Intake Plenum, replace the intake manifold gasket at the same time.
Before installation:
- Thoroughly clean all gasket surfaces.
- Remove old gasket material and carbon buildup.
- Inspect the intake manifold for damage or warping.
- Torque the intake manifold bolts using the factory sequence and specifications.
A few extra minutes during installation can prevent boost leaks and unnecessary future repairs.
Why Choose Genuine Cummins Parts?
A quality gasket is just as important as the components it seals.
Genuine Cummins gaskets are manufactured to OEM specifications for proper thickness, material quality, and long-term sealing performance. They provide the correct fit without trimming or modification and are engineered to withstand the heat, boost pressure, and vibration found in today's 6.7L Cummins engines.
Applications
Fits:
- 2007.5 Ram 2500 6.7L Cummins
- 2007.5 Ram 3500 6.7L Cummins
- 2008 Ram 2500 & 3500 6.7L Cummins
- 2009 Ram 2500 & 3500 6.7L Cummins
- 2010–2024 Ram 2500, 3500, 4500 & 5500 equipped with the 6.7L Cummins
Kit Contents
Includes:
- (1) Genuine Cummins Intake Manifold Gasket
- Cummins Part Number: 5264566
Important Notes
- Genuine Cummins OEM replacement gasket.
- Fits 2007.5–2024 6.7L Cummins applications.
- Designed to seal the intake manifold to the cylinder head.
- Recommended whenever the intake manifold is removed.
- Clean all mating surfaces before installation.
- Follow the factory torque sequence and torque specifications.
- Inspect the intake manifold and mounting hardware before reassembly.
Common Failure Point
One of the most common causes of boost leaks following intake manifold service is reusing an old gasket or installing it on dirty sealing surfaces.
After years of heat cycles, vibration, and boost pressure, the gasket becomes compressed and loses its ability to provide a proper seal. Installing a new OEM gasket during reassembly helps prevent air leaks, soot buildup around the manifold, and unnecessary repeat repairs.
Complete Your Repair
While servicing your intake system, consider replacing:
- Glacier Diesel Power Air-Boss Intake Plenum
- Intake Manifold Bolts
- Intake Air Heater (Grid Heater) Gasket
- MAP Sensor O-Ring
- MAP Sensor
- EGR Crossover Pipe Gaskets
- EGR Valve Gaskets
- Replacement Cummins Sensors and Seals
Cummins 2007.5–2024 Ram 6.7L Cummins Intake Manifold Gasket (5264566)
Description
A leaking intake manifold gasket can lead to boost leaks, reduced performance, excessive soot around the intake manifold, and inaccurate airflow into the engine.
The Cummins 5264566 Intake Manifold Gasket is a genuine OEM replacement gasket designed to seal the intake manifold to the cylinder head on 2007.5–2024 Ram 6.7L Cummins engines. Manufactured to Cummins' original specifications, this gasket provides a precise fit and reliable seal to help maintain proper boost pressure, engine efficiency, and long-term reliability.
Whether you're replacing the intake manifold, installing an aftermarket intake horn or Glacier Diesel Power Air-Boss Intake Plenum, servicing the EGR system, or performing cylinder head work, installing a new gasket is inexpensive insurance against future boost leaks.
Features
- Genuine Cummins OEM gasket
- Cummins Part Number: 5264566
- Fits 2007.5–2024 Ram 6.7L Cummins
- Direct OEM replacement
- Seals the intake manifold to the cylinder head
- Helps prevent boost leaks
- Maintains proper intake air pressure
- High-quality factory sealing material
- Ideal during intake manifold or cylinder head service
Why Replace the Intake Manifold Gasket?
The intake manifold gasket is compressed between the cylinder head and intake manifold. After years of heat cycles and boost pressure, the gasket can lose its ability to maintain a proper seal.
Replacing the gasket whenever the intake manifold is removed helps:
- Prevent boost leaks
- Restore proper sealing
- Maintain engine performance
- Reduce soot buildup around the intake manifold
- Avoid repeating the repair because of a reused gasket
A new OEM gasket is always recommended anytime the intake manifold has been removed.
Glacier Tech Tip
If you're removing the intake manifold to install a Glacier Diesel Power Air-Boss Intake Plenum, replace the intake manifold gasket at the same time.
Before installation:
- Thoroughly clean all gasket surfaces.
- Remove old gasket material and carbon buildup.
- Inspect the intake manifold for damage or warping.
- Torque the intake manifold bolts using the factory sequence and specifications.
A few extra minutes during installation can prevent boost leaks and unnecessary future repairs.
Why Choose Genuine Cummins Parts?
A quality gasket is just as important as the components it seals.
Genuine Cummins gaskets are manufactured to OEM specifications for proper thickness, material quality, and long-term sealing performance. They provide the correct fit without trimming or modification and are engineered to withstand the heat, boost pressure, and vibration found in today's 6.7L Cummins engines.
Applications
Fits:
- 2007.5 Ram 2500 6.7L Cummins
- 2007.5 Ram 3500 6.7L Cummins
- 2008 Ram 2500 & 3500 6.7L Cummins
- 2009 Ram 2500 & 3500 6.7L Cummins
- 2010–2024 Ram 2500, 3500, 4500 & 5500 equipped with the 6.7L Cummins
Kit Contents
Includes:
- (1) Genuine Cummins Intake Manifold Gasket
- Cummins Part Number: 5264566
Important Notes
- Genuine Cummins OEM replacement gasket.
- Fits 2007.5–2024 6.7L Cummins applications.
- Designed to seal the intake manifold to the cylinder head.
- Recommended whenever the intake manifold is removed.
- Clean all mating surfaces before installation.
- Follow the factory torque sequence and torque specifications.
- Inspect the intake manifold and mounting hardware before reassembly.
Common Failure Point
One of the most common causes of boost leaks following intake manifold service is reusing an old gasket or installing it on dirty sealing surfaces.
After years of heat cycles, vibration, and boost pressure, the gasket becomes compressed and loses its ability to provide a proper seal. Installing a new OEM gasket during reassembly helps prevent air leaks, soot buildup around the manifold, and unnecessary repeat repairs.
Complete Your Repair
While servicing your intake system, consider replacing:
- Glacier Diesel Power Air-Boss Intake Plenum
- Intake Manifold Bolts
- Intake Air Heater (Grid Heater) Gasket
- MAP Sensor O-Ring
- MAP Sensor
- EGR Crossover Pipe Gaskets
- EGR Valve Gaskets
- Replacement Cummins Sensors and Seals